Main testing screw screw, screw torsion testing machine products such as screws, screw torque test and broken torque value, can also be used for metal materials and manufactured goods torsion mechanics performance test at room temperature, can also be used for materials and finished goods to reverse damage performance test, etc.

Static torque test.

Control mode 1: torsion Angle test of fixed torque, torque - time curve, torque - twist Angle curve, etc.

Control mode 2: torque test for fixed twist Angle, torque - time curve, torque - twist Angle curve, etc.

Output test report.

Automatic display: in the test process, real-time display test force, peak, test state;

Automatic correspondence: in the experimental process, the Angle and torque automatically correspond;

Automatic operation: input test parameters to complete the test process automatically;

Automatic storage: experimental data and curves are automatically stored in the computer;

Easy to query: click the query button, can query the multi-group experiment data that has been done;

Easy to operate: Chinese menu operation, intuitive and clear;

Dynamic curve: the dynamic curve can be displayed during the test.

Breaking judgment: after the sample is broken, the machine will stop automatically.

Process realization: the test process, measurement, display and analysis are completed by microcomputer;

Batch test: the sample of the same parameters can be completed after one setting.

Curve traversal: after the test is completed, the curve can be reanalyzed.

Test report: form a report and print and store it;

GB/T3098.1-2010 "fastener mechanical performance bolts, screws and studs"

GB/ t3098.13-1996 torque test and damage torque for fastener mechanical performance bolts and screws

GB/ t10128-2007 metal temperature twist test method

Jjg269-2006 "verification procedures for torsion testing machine"

JB/T9370-1999 "technical conditions for torsion testing machine"

Jjg762-1999 "prolongation verification code"

GB/ t2611-2007 test machine general technical requirements

Torque range: 0 ~ 200Nm.

Torque measurement range: 2nm-200nm;

Minimum reading value of torque: 0.01Nm.

Test torque resolution: 1/ + 300000.

Torque value relative error: less than or equal to plus or minus 1.0% (positive rotation and reverse direction)

Torque repeatability relative error: less than 1.0% (positive rotation and reverse direction)

Angle measuring range: 0-10000 °

The relative error of the Angle indicator: less than or equal to plus or minus 1 (positive rotation and reverse direction)

Torsion Angle (small Angle measurement) shows minimum resolution: 0.0001 °

Minimum Angle reading value: 0.01 °

The test speed: 0.05-720 ° / min

Torsion speed indicator relative error: less than or equal to plus or minus 1 (positive rotation and reverse direction)

Torsion speed indicator repeatability error: less than 1.0%.

Strength plate and torque disc distance: 0 ~ 300mm (customizable)

Alignment of two chuck: Φ 0.3 mm or less

Sample clamping diameter: standard sample (sample Φ 10, the range of 50 mm and 100 mm)

Power supply: AC 220V plus or minus 10%, 50Hz;

Power: 0.75 KW

Sample holding mode: provided with a set of fixture according to user sample.

Test level: level 1.

Main engine net size (mm) : about 1300*430*600mm.

Host weight (kg) : about 200.

1, room temperature is 10 ℃ to 35 ℃ range;The relative humidity is not greater than 80%;

2. No vibration, no corrosive medium and clean environment without strong electromagnetic interference;

3. The fluctuation range of the power supply voltage shall be within 10% of the rated voltage;

4. Install correctly on solid foundation.